Mitsubishi A1SD75M1, Руководство пользователя

Страница: 107 / 746

5 - 17
MELSEC-A
5 DATA USED FOR POSITIONING CONTROL
5.1.9 Types and roles of control data
Several controls are carried out as necessary when using the positioning system.
(When the power is turned ON, the default values of the data used for control are set.
However, these values can be set with the sequence program when necessary.)
The items that can be controlled are shown below.
•
Controlling the system data
Sets the clock data in the AD75, and reads/writes the "positioning data". (System
control data Cd.1 to Cd.10 )
•
Controlling the operation
Makes settings related to the operation, and controls the speed change during
operation, and stops/restarts the operation. (Axis control data Cd.11 to Cd.35 ,
Cd.100 , Cd.101 )
(1) Controlling the system data
Setting the AD75 clock data
Control details Corresponding item
Set the item (hour) Cd.1 Clock data setting (hour)
Set the item (minute, second)
Cd.2 Clock data setting (minute, second)
Write the data set in Cd.1 and Cd.2 into the AD75 Cd.3 Clock data writing
Reading/writing the positioning data
Control details Corresponding item
Set the "axis" in which the positioning data subject to reading or
writing is set
Cd.4 Target axis
Set the "positioning data No." subject to reading or writing Cd.5 Positioning data No.
When writing the data, designate which "positioning data" that has
been read in to write
Cd.6 Write pattern
Request writing or reading Cd.7 Read/write request
Temporarily store the read data
* This buffer memory is used as the storage area.
Cd.8 Read/write positioning data I/F
Write the data in the OS area to the flash ROM Cd.9 Flash ROM write request
Initialize the parameters Cd.10 Parameter initialization request