Mitsubishi Electric EZMotion-NC E60 Series, Руководство по эксплуатации

Страница: 396 / 510

6. Operation Panel Switch Functions
6.16 Deceleration Check
II -35
(3) Designation of in-position check width
(a) Servo parameter
# Items Details Setting range
2224 SV024
INP
In-position
detection
width Set the in-position detection width.
Set the accuracy required for the machine.
The lower the setting is, the higher the positioning
accuracy gets, however, the cycle time (setting time)
becomes longer. The standard setting is "50". 0 to 32767 (µm)
(b) Axis specification parameter
# Items Details Setting range
2077 G0inps G0
in-position
width
When an in-position check is performed for G0, this
parameter is valid.
(Comparison of SV024 and this parameter, the
parameter that the in-position width is wider is applied.)
When 0 is set, this parameter is invalid.
(Applicable only to SV024) 0 to 32767 (µm)
2078 G1inps G1
in-position
width
When an in-position check is performed for G1, this
parameter is valid.
(Comparison of SV024 and this parameter, the
parameter that the in-position width is wider is applied.)
When 0 is set, this parameter is invalid.
(Applicable only to SV024) 0 to 32767 (µm)