Mitsubishi Electric EZMotion-NC E60 Series, Руководство по эксплуатации, Страница: 261 / 510

6. Data In/Out
6.4 PROGRAM COPY
I
-246
6.4 PROGRAM COPY
When the menu key
COPY
is pressed, the PROGRAM COPY screen is displayed.
Copy, condense, merge, and number change of user-prepared machining programs (main program
and subprogram) can be performed on the PROGRAM COPY screen.
COPY IC DATA MENU
[PROGRAM COPY] IN/OUT 5
#1 COPY
#2 CONDENSE
#3 MERGE
#4 PROGRAM NO. CHANGE
#( ) O( ) --> O( )
6.4.1 Machining Program Copy
A machining program selected among work programs registered in memory can be copied as another
program having a different program number. The source program remains intact.
Set 1 in # ( ) for the copy command. Set the program number of the copy source program and the
program number of new program.
Press the
INPUT
key.
(Example)
To copy program O1000 into O2000
# ( 1 )
O ( 1 0 0 0 )
→
O ( 2 0 0 0 )
# ( 1 )O ( 1000)
→
O( 2000)
COPY
EXECUTION
# ( 1 ) O( 1000)
→
O( 2000)
COPY
COMPLETE
# ( ) O( )
→
O( )
1) A copy is started and the
message "COPY EXECUTION" is
displayed in the message field. It
may be terminated in a moment
(when there is less copy data).
2) When the copy is complete, the
message "COPY COMPLETE" is
displayed in the message field.