Mitsubishi Electric EZMotion-NC E60 Series, Руководство по эксплуатации

Страница: 29 / 510

1. Setting and Display Unit Operation
1.5 Data Setting Method
I -14
5) Data in parentheses where the cursor exists is erased by pressing the
C.B
CAN
key.
Display is made in the setting area as
shown in the right.
# ( 10) DATA ( 12.345)
If you press the
C.B
CAN
key, # ( 10) DATA ( )
6) Data in all parentheses in the setting area is erased by pressing
SHIFT
C.B
CAN
.
Display is made in the setting area as
shown in the right.
If you press
SHIFT
C.B
CAN
,
# ( 10) DATA ( 12.345)
# ( ) DATA ( )
7) The cursor in parentheses is moved one column to the left or right by pressing the or
key desired character of data entered by using the data keys can be corrected.
Display is made in the setting area as
shown in the right.
If you make successive four strokes of
the
key,
If you press
3
,
# ( 10) DATA ( 12.345)
# ( 10) DATA ( 12.345)
# ( 10) DATA ( 13.345)
2 is corrected to 3 and the cursor is moved one column to the right.
If you press the key,
# ( 10) DATA ( 13.345)
The cursor is only moved one column to the right.
If you press
0
SP
0
SP
0
SP
,
# ( 10) DATA ( 13.000)
The character at the cursor position is rewritten and the cursor is also moved one column to
the right. Data is corrected in sequence.
(Note 1) If is pressed when the cursor exists in the right end within one parenthesis, the
cursor is moved to the right end within the following parenthesis part; if is
pressed when the cursor exists in the left end within one parenthesis, the cursor is
moved to the right end within the preceding parentheses.