Mitsubishi Electric EZMotion-NC E60 Series, Руководство по эксплуатации

Страница: 245 / 510

6. Data In/Out
6.2 DATA OUTPUT
I
-230
When output of the first program is completed, %
is displayed before indicating the next program.
<OUTPUT>
%
DATA OUT EXECUTION
# ( 1 ) DATA ( ALL ) ( )
<OUTPUT>
O 100;
DATA OUT EXECUTION
# ( 1 ) DATA ( ALL ) ( )
Also for each of the second and succeeding
programs, % is displayed each time one
complete program is output.
After all the specified machining programs are
output, EOR is output. EOR is not output for
individual program output.
<OUTPUT>
%
DATA OUT EXECUTION
# ( 1 ) DATA ( ALL ) ( )
<OUTPUT>
O 101;
DATA OUT EXECUTION
# ( 1 ) DATA ( ALL ) ( )
CAUTION
To prevent influence from data omission and data transformation in the communication
circuit, always verify the data after inputting and outputting machining programs.