8. IC Card Operation
8.1 IC Data Screen
I
-302
Item
Details
No. of input
characters
#1 DEVICE
Set the device name. The set device will be
retained until the power is turned OFF.
The "IC CARD" is set immediately after the
power is turned ON.
1
(Note 1)
#2 DIR.
Set the directory.
63
(Note 2)
DEVICE A
#3 FILE
Set the file. Several files can be set by using "
∗
".
63
#4 DEVICE
Set the device name. The set device will be
retained until the power is turned OFF.
The "MEMORY" is set immediately after the
power is turned ON.
1
(Note 1)
#5 DIR.
Set the directory.
63
(Note 2)
DEVICE B
#6 FILE
Set the file. Several files can be set by using "
∗
".
63
#7 Transmit[A->B]
The file (#3) set in device A is sent to device B.
(Note 3)
#8 Transmit[B<-A]
The file (#6) set in device B is sent to device A.
(Note 3)
#9 COL. [A:B]
The file (#3) set in device A and the file (#6) set in device B are
compared.
(Note 3)
#10 File delete[A]
The file (#3) set in device A is erased.
(Note 4)
#11 File delete[B]
The file (#6) set in device B is erased.
(Note 4)
(Note1)
Set the device as shown below.
Setting
value
Set device name
1
Memory (NC internal memory)
3 IC
card
(Note2)
Up to 63 characters can be input at once. However, if a relative path is input, 63 characters
could be exceeded. In this case, the last 62 characters will be displayed, and the first
character will be displayed as "
¯
" (tilde).
(Up to 127 characters can be set for the path.)
(Example)
/MACHINE1/123456789/123456789/123456789/123456789/123456789/1234
↓
¯
ACHINE1/123456789/123456789/123456789/123456789/123456789/1234
(Note3)
If the same device is set for device A and device B, an error will occur.
(Note4)
Only the files in the memory and IC card can be erased.
(Note5)
If setting is attempted without the additional H/W FCU6-EP105-1 installed, an error occurs.
Содержание EZMotion-NC E60 Series
