Mitsubishi Electric EZMotion-NC E60 Series, Руководство по эксплуатации

Страница: 346 / 510

9. Graphics
9.6 SCALE
I -331
(Note 1) The scale value is incremented/decremented by approx. 5% each time the or key is
pressed.
(Note 2) The scale value can be changed in the range of 0.100 to 9999.999.
(Note 3) The path already drawn will not be erased until the
INPUT
key is pressed. However, the
portion of path overlapped with the frame showing the display range will be erased before
the
INPUT
key is pressed.
9.6.2 Changing the Display Position
To move the drawing position, either designate the center of the display range using the cursor key, or
use the current tool position as the center of the display range using the
C.B
CAN
key.
(1) Designating the display range center
X SCALE0 300.000
Y
Press the menu key
SCALE
.
1) The cursor indicating the display range
center appears.
2) SCALE appears in the lower right of
the screen. The current scale value
appears.
X SCALE0 300.000
Move the cursor to the required
display center position using the
cursor keys
, , , .
Y
X
Press the
INPUT
key.
1) The coordinate system changes to the
new coordinate system (having the
cursor position as the screen center).
2) All already drawn graphics (if present)
are erased, and the screen returns to
the initial screen.
Y