Mitsubishi Electric EZMotion-NC E60 Series, Руководство по эксплуатации, Страница: 244 / 510

6. Data In/Out
6.2 DATA OUTPUT
I
-229
6.2.1 Machining Program Output
To output user-prepared machining programs, perform the following:
(1) When only one machining program is output
Specify machining program data type #1 and the number of the program to be output.
E E E E E E
O O O 1000(TEST) O N1 G28 X0 Y0 Z0 O M02 O O
R B B B B R
<OUTPUT DATA>
%
DATA OUT COMPLETE
# ( ) DATA ( ) ( )
1) Data output is started.
Press the
INPUT
key.
Set the data type and program
number.
(Example)
To output program O1000
# ( 1 ) DATA ( 1 0 0 0 )
# ( 1 ) DATA ( 1000) ( )
<OUTPUT DATA>
O1000(TEST);
DATA OUT EXECUTION
# ( 1 ) DATA ( 1000) ( )
Main program unit Program number and comment
(2) When all machining programs are output
To output all machining programs registered in memory in batch, specify machining program data
type #1 and "ALL" in DATA ( ).
Press the
INPUT
key.
Set 1 in # ( ) and "ALL" in DATA
( ).
# ( 1 ) DATA ( A L L )
# ( 1 ) DATA ( ALL ) ( )
All programs are output in the program
number ascending order.
E E
O O
R B
First program
O 100
(Program number and comment)
(Program main unit)
E
O
R
Second program
O 101
(Program number and comment)
(Program main unit)
Third and later program
(Note 1) When all data of one machining program is output, % is displayed. Note that % is not
displayed each time individual data items are output.