Mitsubishi Electric EZMotion-NC E60 Series, Руководство по эксплуатации

Страница: 319 / 510

8. IC Card Operation
8.1 IC Data Screen
I
-304
Item Details
DEVICE
The designated device name is displayed. The device is set on the "IC CARD I/O"
screen.
DIR.
The directory name is displayed with the full path. (Note 1)
The directory name display will be updated when the following step is carried out.
•
Select Directory from the file list.
•
Select "Back.." from the file list.
<FILE>
The files and directories in the designated directory are displayed. Up to 36
alphanumerical characters can be displayed.
The selected file is highlighted. Another file can be selected using the
and
keys.
If the device is "MEMORY", the file name and directory name will be fixed names.
(Refer to "8.1.3 NC data file name".)
<SIZE>
The file size is displayed. (Unit: Byte)
The unit display will change according to the file size.
•
When 1024Byte is exceeded: KB
•
When 1024KB is exceeded: MB
•
When 1024MB is exceeded: GB
A directory will be displayed as "<dir>".
File List
<REFERENCE>
The date and time (hour, minute, second) that the file was saved are displayed.
If the device is "MEMORY", the following will be displayed.
•
When file is a program : A comment will display
•
When file is not a program : There will be no display.
(Note 1) If directory name exceeds 63 characters, the last 62 characters will be displayed, and the first
character will be displayed as "
¯
" (tilde).
(Example) /MACHINE1/123456789/123456789/123456789/123456789/123456789/1234
↓
¯
ACHINE1/123456789/123456789/123456789/123456789/123456789/1234
(Note2) It is recommended that alphanumerical characters be used for directory names. Two-byte
characters can be displayed with NC but cannot be input. Directory cannot be directly input
and selected.
(Note3) The combination of up to 8 alphanumerical characters of identifier and up to 3 alphanumerical
characters of extension is recommended for a file name.
If the file name exceeds 8 alphanumerical characters, only the first 6 characters will be
displayed and the rest will be displayed as "
¯
" (tilde) on the screen.
If the first 6 characters of file names are the same, those file names are expressed as follows.
(Example)
(a) 123456789.PRG
↓
123456¯1.PRG
(b) 123456789ABCDEFG.PRG
↓
123456¯2.PRG
If such files are input (from IC to NC) in order of (a) and (b), file (a) will be overwritten by file (b).
Thus, file name always has to be "8 alphanumerical characters.extension". Note that the
operation error (E51) occurs if a file (excluding parameter file) containing other than one-byte
numerical characters in name is transferred.
(Note4)
When "MEMORY" is selected for the device name, up to 18 alphanumerical characters are
displayed in <Remarks> as the machining program comment.