Mitsubishi Electric EZMotion-NC E60 Series, Руководство по эксплуатации

Страница: 169 / 510

4. Parameters (User)
4.2 Machining Parameters
I -154
4.2.4 Barrier Data
[BARRIER] PARAM 1.7/8
#
8300 P0 X
0.000 8310 BARRIER ON 0
8301 P1 X
0.000 Z 0.000 8311 P7 X 0.000
8302 P2 X 0.000 Z 0.000 8312 P8 X 0.000 Z 0.000
8303 P3 X 0.000 Z 0.000 8313 P9 X 0.000
8304 P4 X 0.000 Z 0.000 8314 P10 X 0.000 Z 0.000
8305 P5 X 0.000 Z 0.000 8315 BARRIER TYPE (L) 0
8306 P6 X 0.000 Z 0.000 8316 BARRIER TYPE (R) 0
8317 DELIV. AX. NAME B
8318 STOCK ANGLE (L) 0
8319 STOCK ANGLE (R) 0
# ( ) X( ) Z( )
WORK PROCESS I/O PAR SETUP MENU
# Item Contents Setup range (unit)
8300 PO
(For L system only)
Set the basic X-coordinates of the chuck and the tail
stock barrier.
Set the center coordinate (Radius value) of
workpiece by the basic machine coordinate system. ±99999.999 (mm)
8301
8302
8303
8304
8305
8306 P1
P2
P3
P4
P5
P6
(For L system only) Set the area of the chuck and tail stock barrier.
(Radius value)
Set the coordinate value from the center of
workpiece for X-axis. Set the coordinate value by
basic machine coordinate system for Z-axis. ±99999.999 (mm)
8310 Barrier ON
(For L system only)
Select the validity of the chuck and tailstock barrier.
0: Invalid
1: Valid
0/1
8311
8312 P7
P8
(For L system only) Set the area of the left spindle section.
•
X axis: Set the coordinate value from the
workpiece center (P0). (Radius value)
•
Z axis: Set the coordinates in the basic machine
coordinate system.
±99999.999 (mm)
8313
8314 P9
P10
(For L system only) Set the area of the right spindle section.
•
X axis: Set the coordinate value from the
workpiece center (P0). (Radius value)
•
Z axis: Set the coordinates in the basic machine
coordinate system.
±99999.999 (mm)
8315 BARRIER TYPE (L)
(For L system only)
Set the shape of the left chuck and tailstock barrier.
0: No area
1: Chuck
2: Tailstock
0/1/2
8316 BARRIER TYPE (R)
(For L system only)
Set the shape of the right chuck and tailstock barrier.
0: No area
1: Chuck
2: Tailstock
0/1/2