Mitsubishi Electric EZMotion-NC E60 Series, Руководство по эксплуатации

Страница: 324 / 510

8. IC Card Operation
8.1 IC Data Screen
I
-309
(6) Transferring files
1) Set the transfer origin and transfer
destination files.
(Refer to steps (1) to (5) in the previous
section for the operation methods.)
If the transfer destination file is omitted,
the file will be transferred with the same
name as the transfer origin file. Note that
when inputting and outputting the
machining programs in the memory
device, the extension (.PRG) will be
added or deleted automatically.
[IC CARD I/O]
DEVICE A
#1 DEVICE (IC CARD )
#2 DIR. (/MACHINE1/PRG
#3 FILE (100.PRG
DEVICE B
#4 DEVICE (MEMORY )
#5 DIR. (/PRG/USER
#6 FILE (100
Automatically determining the transfer origin file name
Transfer origin
device: /file name
Transfer
destination
device:
/file name
Transfer
destination file
name
Explanation
Memory:
/PRG/USER/100 IC CARD:
/ 100.PRG Transferred as same file name
capital character extension is
automatically added
IC CARD:
/100.PRG Memory:
/PRG/USER 100 Extension (PRG) is automatically
deleted
A CHOICE B CHOICE CHANGE
#(7) (
2) Input "7" in the setting area # ( ), and
press the
INPUT
key.
When using #7 Transmit [A
→
B], device A
will be the transfer origin.
When using #8 Transmit [B
→
A], device B
will be the transfer origin.
WRITE :NO SCR.CHG
The transfer will start, and the message
"WRITE :NO SCR.CHG " will appear.
When the transfer is completed, the message
"WRITE COMPLETE" will appear, and then
"DATA IN COMPLETE" or "DATA OUT
COMPLETE" will appear.
(Note 1) When transferring multiple files with the "
∗
" designation, the message "WRITE :NO
SCR.CHG" and "WRITE COMPLETE" will appear each time a file is transferred. "DATA IN
COMPLETE" or "DATA OUT COMPLETE" will appear when the last file has been transferred.
An operation error will occur in the following cases.
•
When the transfer origin file cannot be found. (E313)
•
When a file with the same name is found at the transfer destination. (E314)
•
When transfer was not possible. (The IC card is not installed. etc.)