Miller AG-BAG Professional LX1214, Руководство оператора

Страница: 72 / 158

66
Install Tunnel Extension On To Tun-
nel
The tunnel extension is stored on the top of the
tunnel. Two people are required for this proce-
dure.
1. Attach the bag boom hook to the lift eye lo-
cated at the center of the tunnel extension.
2. Remove the clip pin and retainer pin hold-
ing the tunnel extension to the bagger.
This is the top center pin on the extension.
3. Using the bag boom, swing the tunnel ex-
tension out and lower to a position in front
of the tunnel. Line up the five pins on the
extension with the five receiver tubes on
the tunnel. Slide the tunnel extension pins
into the receiver tubes.
4. Secure in place with the pins and clips
supplied with your bagger.
5. Unhook the bag boom from the lift eye on
the tunnel extension.
6. Fold the eye down against the tunnel ex-
tension to prevent damage to the bag.
Center Retainer Pin
Boom Winch Attached To Tunnel Extension
Lift Eye
Tunnel Extension Pins
Lift Eye
Tunnel Extension
Receiver Tube
Extension Pin
Retainer Pin & Clip
Center Tunnel Pin