Miller AG-BAG Professional LX1214, Руководство оператора

Страница: 68 / 158

62
Important: Things to know about a turbo-
charged engine.
•
If you ever stall the engine while working,
restart the engine
immediately to provide
lubrication to the hot turbocharger and
avoid damaging it.
•
Before shutting off the engine, allow it to
idle for several minutes under 1000 rpm to
cool the turbocharger turbine.
Engine Cold Starting
Two batteries provide 1800 cold cranking amps.
To Start
1. Turn the key to RUN
2. Check for error codes on the System Moni-
tor display. Press the F2 key on the display
to clear.
3. Check for any bystanders around the bag-
ger.
4. Sound the horn by pressing the horn but-
ton located next to the joystick.
5. Turn the key to start the engine.
6. The engine is equipped with a block heater
to aid in cold weather starting. The block
heater cord is located next to the engine oil
filter.
Inoculant Applicator Operation
The amount of inoculant applied and the rate it
is applied can be changed by adjusing the pres-
sure of the system or by changing the spray tips
inside the hopper. Refer to the table for tip infor-
mation and pressures. Your bagger was shipped
from the factory with the spray tip highlighted on
the chart below.
The pressure can be adjusted with the control
knob located under the inoculant tank. Watch
the pressure gauge in front of the cab for inocu-
lant pressure setting.
If changing the spray tips, there are four spray
tips located in the feed hopper.
Pressure Adjustment Knob Under Inoculant
Tank
Inoculant System Pressure Gauge
Gauge
Adjustment Knob
Engine Block Heater
Block Heater Cord
Block Heater