Miller AG-BAG Professional LX1214, Руководство оператора

Страница: 34 / 158

28
Direction & Steering Joystick
Button
Trigger
Driving in Transport Mode:
1. Be sure to raise the lift jacks before trans-
porting.
2. Release the parking brake.
3. Move the joystick in the direction you want
to travel. Move the joystick forward or
backward to drive and side to side to steer.
The trigger at the front of the joystick must
be engaged (pressed).
a. In transport mode, the joystick controls
steering on the engine end only. The
electronic control system will steer the
cab end wheels to follow the engine
end.
b. Steering angles are limited to approxi-
mately 20 degrees in one direction and
30 degrees in the other direction. (20
degrees is a mechanical stop, 30 de-
grees is an electronic stop).
Driving in Trailer Mode:
1. Be sure to raise the lift jacks.
2. Release the parking brake.
3. Move the joystick in the direction you want
to travel. Drive is forward or backward.
4. Wheels at the cab end and engine end are
steered independently using the joystick.
Cab end wheels are steered by moving
the joystick side to side with the trigger at
the front of the joystick engaged (pressed).
Engine end wheels are steered by moving
the joystick side to side with the trigger at
the front of the joystick engaged (pressed)
and the button on the top of the joystick
engaged (pressed).
NOTE: Trailer Mode is recommended when
loading or unloading machine from a trailer.
Direction and Steering Joystick
The direction and steering joystick is located to
the right of the operators seat and in front of the
right side armrest.
The joystick has two additional controls on it
for use with other modes. A trigger is located
on the front side of the joystick handle and a
push button is located on the top of the joystick
handle.
Refer to the operational modes of the joystick for
an explanation of what the joystick will control.