Miller AG-BAG Professional LX1214, Руководство оператора

Страница: 73 / 158

67
Lower and Setup Feed Table
The feed table must be lowered to the ground
before the side panels can be setup.
Check to be sure the area in front of the feed
table is clear before lowering.
1. Unlock the feed table transport lock.
2. Using the feed table raise/lower switch on
the right side console in the cab, lower
the feed table to the ground. Release the
switch when the feed table reaches the
ground.
3. Lift the side panels up until the spring
loaded locks enter into the lock plate hole.
The locks can be pulled up and rotated to
remain in the unlocked (up) position which
is helpful when lowering the side panels
down to the feed table.
4. Stretch the bungee cords from the front
panel around the front of each side panel
and hook in place to hold the front rubber
flap up.
Feed Table Lock
Feed Table Down
Feed Table Setup
Side Panel Lock
Front Rubber Flap Bungee Cord
Lock Handle
Panel Lock
Bungee Cord
Hook Here