Miller AG-BAG Professional LX1214, Руководство оператора

Страница: 133 / 158

127
Radiator, Oil Cooler, Charge Air
Cooler and Air Conditioning Con-
denser Heat Exchangers
WARNING
Do not service the engine or any compo-
nents while the engine is running. Doing so
could result in serious injury from contact
with moving parts.
The engine radiator, charge air cooler, hydraulic
oil cooler, planetary cooler, clutch cooler and the
air conditioning condenser are in a side to side
stacked arrangement.
The cooling fan sucks air through the coolers
from the outside.
Cooling System
Cooling Package Cleaning
This bagger is equipped with a reversing
fan feature that aids in keeping the cooling
package clean. If the reversing fan is unable
to keep the cooling package clean, manually
clean the system as described below.
Cleaning should be directed from the inside of
the cooling package toward the outside. Use
a pressure washer or compressed air to clean
the fins. The outside screen can be opened for
access to the cooling package fins. Locate the
screen release at the rear underside of the outer
screen. Push up on the screen release and
swing the screen open. Be careful not to bend
the fins.
Inspect the cooling package every 50 hours of
operation for debris and any leakage of the fit-
tings. Repair any leaks immediately. Straighten
any dented or damaged cooling fins.
Be sure to close the outer screen and latch into
position before starting the engine.
WARNING
R-134A Refrigerant under pressure, system
to be serviced by qualified personnel only.
Outer Radiator Screen Open