Miller AG-BAG Professional LX1214, Руководство оператора

Страница: 29 / 158

23
Anchor Float Switch
Location (E)
The anchor float switch is a two position rocker
switch which turns the anchor float on and off.
When the anchor float is turned on, a icon will
appear on the display panel on the right side
corner post alerting the operator that the float
is on. Once the float is turned off the icon will
disappear.
Push the top of the switch in to turn the anchor
float on.
Push the bottom of the switch in to turn the an-
chor float off.
Turn the anchor float off during bagging op-
erations. Turn the anchor float on to allow the
anchors to float out when starting a new bag.
Anchor Float Switch
Anchor Float Switch
Anchor Switch In/Out
Location (F)
The anchor in/out switch is a three position (mo-
mentary) switch which powers the anchors in or
out. When the switch is released, it will return to
the center (off) position
Push and hold the top of the switch in to power
the anchors in toward the tunnel.
Push and hold the bottom of the switch in to
power the anchors out away from the tunnel.
Always watch the anchor position scale (located
directly in front of the windshield) when powering
the anchors in or out.
IMPORTANT: The anchor float switch must be
off to power the anchors in or out.
Anchor Switch In/Out
Anchor In/Out Switch
Anchor Position Scale
Anchor Position In Feet