Miller AG-BAG Professional LX1214, Руководство оператора

Страница: 92 / 158

86
3. Raise the ladder for the cab and slide
under the cab. Slide the ladder all the way
in and lock into place. Be sure the ladder
lock is engaged completely.
4. Be sure the platform at the engine is folded
in and clipped into position. Be sure the
railing is pushed all the way in and the
clips are securely fastened.
5. Lower the cab end lift jack to raise the cab
end of the bagger high enough to hook
the pintle hitch of the bagger on to the
pintle hitch of the towing vehicle. Lower
the bagger down onto the tow vehicle hitch
and raise the lift jack all the way up. Never
transport the bagger with the lift jack down.
6. Shut the bagger engine off.
7. Close the exhaust by taping the exhaust
pipe shut with duct tape to keep the turbo-
charger from spinning without lubrication.
8. Connect the air lines from the tow vehicle
to the air connections on the bagger.
Connect the brake air line to the “Service”
connection on the bagger. Connect the
constant air supply line to the “Emergency”
connection on the bagger.
9. Connect the 7 pin electrical cord between
the tow vehicle and the connection on the
bagger. The plug terminal on the bagger is
wired per the ANSI/ASAE S279.13 Specifi-
cations.
Ladder In Transport Position
Engine Platform In Transport Position
Air And Electrical Hook Ups
Electrical Hook Up
Service Connection
Emergency Connection
Ladder Lock
Platform Lock Pins
Lock Pin
Light plug terminal identification
1
3
4
5
6 Ground
Bright Amber
Bright Red
Bright Amber
Dim Red
LH Turn & Flash
Stop Lamps
RH Turn & Flash
Tail Lamps
Light receptacle wired per ANSI/ASAE S279.13