Miller AG-BAG Professional LX1214, Руководство оператора

Страница: 76 / 158

70
CAUTION
Caution should be used when moving bags.
Bags are heavy.
4. Unfold the bag and lift the top half of the
bag and place it on the bag cradle. Using
the winch on the bag boom, raise the bag
up. Once the bag is raised, rotate the bag
so the stretch measure marks are between
1 and 3 o’clock.
NOTE: Do Not roll the bag while placing on the
tunnel. Keep the f olds flat. Bag damage could
occur if bag is not flat.
5. Lower the bag pan to allow placement of
the bag around the tunnel and in the bag
pan.
6. Raise the cradle with the bag boom winch
up until the cradle is above the tunnel.
Swing the boom and cradle toward the
tunnel. Carefully work the bag around the
tunnel, making sure the bag maintains its
flat look and is flat between the tunnel and
the bag pan.
7. Lower the cradle until it is resting on top
of the tunnel. Make sure the cradle is on
the tunnel and not on the tunnel extension.
The cradle should rest between the two
pipes on the top of the tunnel. Once the
cradle is in place on the tunnel remove all
the ties that hold the bag folds together.
8. Use the bag pan control to bring the bag
pan in toward the tunnel until there is ap-
proximately 3/4” between the bag pan and
the tunnel.
9. Place the long tunnel bungee cord over the
bag on the tunnel and hook on to the bag
pan on each side of the tunnel.
IMPORTANT: To avoid damage to the bag
during operation and setup, be sure the lift-
ing eye on the top of the tunnel extension is
laying flat against the tunnel extension.
Bag On Tunnel
Bag In Bag Pan With Bungee Cord
Bungee Cord