Miller AG-BAG Professional LX1214, Руководство оператора

Страница: 28 / 158

22
Signal Light Switch (Amber)
Signal Light Switch
Signal Light Switch Amber
Location (C)
The signal light switch for the amber signal lights
is a two position rocker switch which turns the
amber signal lights on and off.
Push the top of the switch in to turn the amber
signal lights on.
Push the bottom of the switch in to turn the am-
ber signal lights off.
Use this switch in conjunction with the red-green
signal light switch to alert anyone around the
bagger as to the operational status. Go over the
colors used for each message intended before
any operation is started. Once operation is
started do not stray from the intended message
for each light.
Inoculant Spray Applicator Switch
Inoculant Spray Switch
Inoculant Spray Applicator Switch
Location (D)
The inoculant spray applicator switch is a two
position rocker switch which turns the inoculant
spray applicator pump on and off.
IMPORTANT: The rotor must be engaged be-
fore the pump will operate.
Push the top of the switch in to turn the inoculant
spray applicator pump on.
Push the bottom of the switch in to turn the in-
oculant spray applicator pump off.
Do not run the applicator pump without liquid
in the inoculant tank which is located under the
cab floor on the feed table side of the machine.
Refer to the “Storage” section of this manual for
cleaning prior to storage.
This tank and system should be drained and
cleaned daily. Refer to the “Inoculant Applicator”
section in the “Operation” section of this manual.