Miller AG-BAG Professional LX1214, Руководство оператора

Страница: 126 / 158

120
Maintenance
Maintenance Schedule
Review the following maintenance schedule regularly to determine when maintenance is required.
Record the maintenance on the following pages whenever it is performed. Consult the other main-
tenance sections of this manual for proper maintenance procedures.
Service To Be Performed
Interval
250 Hour
s
400 Hour
s
Ann
uall
y
750 Hour
s
1000 Hour
s
2 Y
ear
s
1500 Hour
s
2500 Hour
s
10 Hour
s
Dail
y
W
eekl
y
100 Hour
s
As Required
+ Perform at initial break in
X Required service interval
500 Hour
s
Check drive belts +
Tighten lug nuts + X
Check engine oil level X
Check coolant level X
Check hydraulic oil level X
Clean hydraulic suction strainers X
Drain fuel filter/water separator X
Lubricate anchor cable guide rollers X
Check engine air filters X
Check oil level in planetary drive + X
Check oil level in HPTO controller reservoir + X
Drain moisture from air storage tank X
Remove trash/debris from chassis & engine area X X
Lubricate feed table drive and idler roller bearings X
Lubricate upper and lower beater bar bearings X
Lubricate rotor bearing X
Oil beater bar chain X
Oil feed table drive chain X
Replace engine air filters X X
Clean air conditioner condenser/hydraulic oil cooler X
Clean or replace cab filters (in cab & charcoal) X
Change coolant conditioner filter/coolant filter X
Lubricate steering tie rod X
Lubricate bag boom X
Lubricate wheel column posts X
Lubricate brake pivot arms X
Lubricate engine & cab end lift slide tubes X
Inspect cooling package X
Check tire inflation X
Change engine oil and filter X
Check coolant PH condition (extended life coolant only) X
Replace main hydraulic oil filters X
Replace case drain oil filter X
Replace fuel filter/water separator X
Change clutch filter & oil X
Change feed table planetary oil X X
Change main planetary oil & filter X X
Clean or replace cab filters (in cab & charcoal) X
Clean engine vent tube X
Repack feed table wheel bearings X
50 Hour
s