Miller AG-BAG Professional LX1214, Руководство оператора

Страница: 105 / 158

99
SPN # FMI # Cummins
Fault #
Lamp Color Reason For Fault Effect If Fault Is Active Course Of Action
633 6 379 Yellow High Current Detected
At Front Fueling Actuator
Circuit Engine Will Run Using
Only The 3 Rear Cylin-
ders Call Cummins
Service
635 5 394 Yellow Low Current Or Open
Circuit Detected At Front
Timing Actuator Circuit Engine Will Run Using
Only The 3 Rear Cylin-
ders Call Cummins
Service
635 6 395 Yellow High Current Detected
At Front Timing Actuator
Circuit Engine Will Run Using
Only The 3 Rear Cylin-
ders Call Cummins
Service
636 9 285 Yellow The Ecm Expected
Information From A
Multiplexed Device But
Did Not Receive It Soon
Enough, Or Did Not Re-
ceive It At All At Least One Multiplexed
Device Will Not Operate
Properly Check All J1939
Wiring And Devices
Controlled By The
Engine. Call Cum-
mins Service.
636 13 286 Yellow The Ecm Expected
Information From A Mul-
tiplexed Device But Only
Received A Portion Of
The Necessary Informa-
tion At Least One Multiplexed
Device Will Not Operate
Properly Check All J1939
Wiring And Devices
Controlled By The
Engine. Call Cum-
mins Service.
639 2 426 None Communication Between
The Ecm And Another
Device On The J1939
Datalink Has Been Lost None On Performance.
J1939 Devices Possibly
Do Not Operate. Check All J1939
Wiring And Devices
Controlled By The
Engine. Call Cum-
mins Service.
647 4 245 Yellow Less Than 6 Vdc Detect-
ed At Fan Clutch When
On. Indicates An Exces-
sive Current Draw From
The Ecm Or A Faulty
Ecm Output Circuit. The Fan Can Stay On All
The Time Call Cummins
Service
723 7 731 Yellow Engine Speed Sensor
And Camshaft Position
Sensor - Mechanical
Misalignment Between
Camshaft And Crankshaft
Sensors. Engine Position
Signal From The Engine
Speed Sensor And Cam-
shaft Position Sensor Do
Not Match. Engine Will Run Derated.
Excessive Smoke, Hard
Start And Rough Idle
Possible. Call Cummins
Service
723 2 753 Yellow Engine Position Signal
From The Camshaft And
The Crankshaft Engine
Position Sensors Do Not
Match Up Low Power, Rough Idle,
Or Possible White Smoke Call Cummins
Service
1043 4 284 Yellow Incorrect Voltage De-
tected On The Ecm
Voltage Supply Wire To
The Crankshaft Engine
Position Sensor Engine Can Possibly Not
Run Or Will Run Derated.
Possible Hard Startting,
Low Power, Or White
Smoke Call Cummins
Service