Miller AG-BAG Professional LX1214, Руководство оператора

Страница: 71 / 158

65
Display for Bag Mode
6. Steer the engine end wheels to 90 degrees
± 2 degrees.
7. Lower the engine end wheels to the
ground by lifting the jack all the way up.
8. Press the “Drive” switch on the switch
panel on the right side corner post. Cab
end wheels will steer automatically to
match the engine end. If the wheels are
more than 5 degrees apart, “In Between
Mode” will be indicated on the display
9. Press the “Align” switch on the switch pan-
el on the right side corner post, steer the
wheels to within 5 degrees, then press the
“Drive” switch. Cab end wheels will steer
automatically to match the engine end.
Display for In Between Mode
Align and Drive Switch
Press This End For Drive
Press This End For Align
10. Mode on the display will switch to Bag
Mode.
NOTE:
With the wheels in this mode, the wheels
will “crab” steer (all wheels remain parallel).
11. Place the “2 Wheel Drive/4 Wheel Drive”
switch in the 4 wheel drive position (push
the lower part of switch in).
2 Wheel Drive/4 Wheel Drive Switch
Press This End For 4
Wheel Drive