Miller AG-BAG Professional LX1214, Руководство оператора

Страница: 88 / 158

82
Transport Lock
The transport lock is only required when towing
the bagger with a tow vehicle.
1. If transporting with a tow vehicle, the en-
gine end wheels have to be locked in the
straight front to back position.
2. The lock is located next to the engine end
wheel on the feed table side.
3. Remove the retaining pin and clip. Allow
the lock to swing down into the notch on
the wheel column.
4. Reinstall the retaining pin and clip in the
lower hole to secure the lock in the trans-
port position.
5. When not using the transport lock, remove
the pin and clip, raise the lock up away
from the wheel column and re-insert the
pin in the upper hole under the lock to hold
it up. Clip in place.
Wheel Lock In Unlocked Position
Pin & Clip
Wheel Lock In Locked Position
Wheel Lock
Pin & Clip
Wheel Lock