Miller AG-BAG Professional LX1214, Руководство оператора

Страница: 153 / 158

147
Anchor Cables
Anchor Cable Replacement
WARNING
Serious injury could occur. Always wear
protective gloves when handling wire rope
cables.
1. The bag pan must be fully lowered in order
to access the anchor cylinder.
2. Fully extend the anchor cylinder, then retract
1 inch. Shut off the engine when measuring.
3. Insert the cable from the outside. Use the
other cable as a guide when installing the
new cable. The longer cable is on the en-
gine end and the shorter cable is on the cab
end.
4. Insert the cable through the cable guide and
over the roller.
5. Guide the cable end around the pulley and
through the hole in the plate.
6. Route the cab le under the first pulley on the
cylinder rod end. From the first pulley route
the cable over the top of the first pulley on
the cylinder. Repeat this process for the
remaining pulleys.
Anchor Cable Routing
Shorter Cable (Cab End)
Longer Cable
(Engine End)
Roller
Pulley
Cylinder Rod
End Pulleys
Anchor Cable Over Roller
Anchor Cable Around Pulley
Anchor Cylinder Rod End Pulleys
Roller
Cables Installed On
Rod End Pulleys