Miller AG-BAG Professional LX1214, Руководство оператора

Страница: 120 / 158

114
Adjust the belt tension as follows:
1. A wrench is provided for loosening the
locknuts and turning the adjuster nuts. The
wrench is in a storage tube at the front cor-
ner of the engine frame on the feed table
side.
2. Loosen the adjuster locknuts on the four
corners of the engine frame.
3. Turn the top adjuster nut to move the entire
engine frame assembly up. Turn all four
adjuster nuts the same amount to keep the
engine level and in alignment. Adjustment
usually only requires 1/8 to 1/4 turn.
4. After the belt is tensioned, lock all four
adjusters with the locknuts.
5. Place the wrench back into the storage
tube when finished.
WARNING
Do not operate the bagger unless all guards
and covers are secured in place or closed.
Moving parts inside could cause serious
injury or death.
6. Close and latch the planetary drive belt
cover. Never operate the bagger with any
shields or covers open or missing.
Adjuster Wrench In Storage Position
Engine Adjuster
Adjuster Nut
Locknut