Miller AG-BAG Professional LX1214, Руководство оператора

Страница: 96 / 158

90
Storage
It is important that the bagger be thoroughly
cleaned before storing. Thoroughly wash the
entire bagger to remove any residue left from
the bagging season.
Completely rinse and drain the liquid inoculant
tank and system on the bagger.
If the temperature is expected to drop down be-
low freezing, completely drain all water from the
inoculant tank and system. Charge the com-
plete inoculant system (tank through nozzles)
with approximately 5 gallons of RV antifreeze.
Leave some RV antifreeze in the inoculant tank.
Thoroughly clean all forage residue from the
tunnel, feed table and rotor area. Crop juices
are very corrosive if left to stand in the hopper,
tunnel and feed table area.
Grease all fittings to purge any forage residue
juice from the bearings.
Refer to the Engine Operation and Maintenance
Manual for storage procedures for the engine.
Use touch up paint on any areas that the paint
has been worn off to prevent rusting and corro-
sion during storage.
Store the bagger inside and out of the weather.