Miller AG-BAG Professional LX1214, Руководство оператора

Страница: 80 / 158

74
IMPORTANT: If the operator leaves the op-
erators seat during bagging operations the
following will happen:
A message will appear on the System Moni-
tor display and a timer will start a count
down. To clear the timer, sit in the operator
seat and move the feed table control to the
center position.
If not cleared:
The feed table will stop after 4 seconds.
The engine will start to decelerate after 8
seconds from the time the operator leaves
the seat.
The HPTO clutch will disengage and the rotor
and lower beater will stop after 10 seconds
from the time the operator leaves the seat.
If this happens the operator will have to re-
start the rotor and feed table once the opera-
tor is seated in the operators seat.
5. Start the feed table by moving the control-
ler on the right side console in the desired
direction either away from the rotor or
toward the rotor. Moving the controller
farther from center will increase the speed
of the feed table. Refer to the “Features
and Controls” section “In Cab Controls” for
a detailed explanation.
6. Start the upper beater in a clockwise or
counter-clockwise direction by activating
the upper beater switch in the appropri-
ate direction. Refer to the “Features and
Controls” section “In Cab Controls” for a
detailed explanation.
System Monitor Display - Seat Switch Open