Miller AG-BAG Professional LX1214, Руководство оператора

Страница: 112 / 158

106
Upper Beater Bar Bearings
Grease twice per bag
On the engine side of the hopper, locate the
drive for the upper beater bar. Clean off the
grease fitting on the bearing. Attach the grease
gun. Wipe up excess grease. Grease this bear-
ing twice each bag, two pumps at the beginning
of the bag and two pumps halfway through the
bag. Do not over grease. It is better to give the
bearings smaller amounts of grease more often,
than large amounts of grease.
Locate the upper beater bar bearing on the cab
side of the hopper. Wipe off the fitting before at-
taching the grease gun. Wipe up excess grease.
Grease this bearing twice each bag, two pumps
at the beginning of the bag and two pumps
halfway through the bag. Do not over grease. It
is better to give the bearings smaller amounts
of grease more often, than large amounts of
grease.
Lower Beater Bar Bearings
Grease twice per bag
On the cab side of the hopper, locate the shield
covering the lower beater bar drive. Clean off
the grease fitting through the access hole in the
shield. Attach the grease gun. Wipe up excess
grease. Grease this bearing twice each bag,
two pumps at the beginning of the bag and two
pumps halfway through the bag. Do not over
grease. It is better to give the bearings smaller
amounts of grease more often, than large
amounts of grease.
Locate the lower beater bar bearing on the
engine side of the hopper. Wipe off the fit-
ting before attaching the grease gun. Wipe up
excess grease. Grease this bearing twice each
bag, two pumps at the beginning of the bag
and two pumps halfway through the bag. Do
not over grease. It is better to give the bearings
smaller amounts of grease more often, than
large amounts of grease.
Upper Beater Drive End Bearing Grease Fit-
ting
Upper Beater Bearing Grease Fitting
Lower Beater Drive End Bearing Grease Fit-
ting
Lower Beater Bearing Grease Fitting
Access Hole
Grease Fitting
Grease Fitting
Grease Fitting