Miller AG-BAG Professional LX1214, Руководство оператора

Страница: 75 / 158

69
Install The Bag On To The Tunnel
Use the bag boom to lower the bag cradle to the
ground.
1. Hook the bag boom cable hook to the loop
at the center of the cradle.
2. Lift the cradle off the top of the tunnel,
swing out and lower to the ground in front
of the tunnel. Be sure the cradle is cen-
tered in the tunnel and close to the tunnel.
3. Line up the box with the back of the tun-
nel and cradle, making sure the arrow on
the end of the box is pointing toward the
tunnel. Cut the plastic bands from the box
and remove the outer lid. DO NOT remove
the ties around the bag until the bag is on
the tunnel. Remove the inner shell and the
bo
x will flatten.
Bag Cradle Placement
Arrow On Bag Box
Arrow
5. Return to the cab, sound the horn, start
the engine and use the anchor In/Out
switch on the right side console to retract
both anchors. Retract both of them all the
way in to the guides.
Anchors In Bagging Position
Tunnel Cleanout
Before placing the bag onto the tunnel, use the
tunnel cleanout switch on the right side console
to open and close the cleanout plate. Be sure
cleanout is closed and tunnel cleanout icon
turns off before bagging.
Tunnel Cleanout
Cleanout Plate
Tunnel Cleanout Open Icon
Cleanout Icon