Miller AG-BAG Professional LX1214, Руководство оператора

Страница: 54 / 158

48
Remote Control On Off Switch: For the
remote to become functional, the remote on off
switch has to be positioned in the on (up) posi-
tion, thus giving power to the remote. When not
using the remote, be sure to turn the remote
switch off (down).
IMPORTANT: When the remote control is acti-
vated, the wheel drive controls inside the cab
are locked out.
When the remote is attached to the bagger, it
can be stored on the remote hanger located
above the remote connection point. Always
remove the remote from the bagger when trans-
porting.
Remote Control On Remote Hanger
Remote Control On/Off Switch
Outside Cab End Up-Down Switch
Machine Up or Down: This control is used to
lift or lower the cab end of the bagger by lower-
ing or raising the lift jack at the cab end. It is
located on the frame next to the inoculant tank.
DANGER
To prevent personal injury stay clear of hy-
draulic cylinder and lift jack pad when lower-
ing lift jack to the ground. Severe crushing
will occur.
Use this control to lift the cab end of the bag-
ger. Lift the bagger up only as far as needed
to rotate the wheels or to hitch to a tow vehicle.
This switch is spring loaded and will return to the
center (Off) position when released. Push the
switch up to lower the lift jack (raise machine).
Push the switch down to raise the lift jack (lower
machine).
Cab End Up-Down Switch
Be sure to raise the lift jack completely before
moving the bagger and during bagging opera-
tion.
On/Off Switch
Up-Down Switch