Lanier LP222cn, Руководство оператора

Страница: 110 / 536

Configuration
98
O
After entering the key, press the
{
# Enter
}
key twice.
After the settings are made, about two seconds later, the screen returns to the
IEEE 802.11b setting menu.
P
In the case of using a WEP key on a network, activate the WEP setting
to be used for communication along with WEP.
❒
Confirm the network administrator for the WEP Key to use.
❒
WEP key can also be set using a Web browser. For details, see Web Im-
age Monitor Help.
Q
Press the
{U}
or
{T}
key to display [ WEP Setting ], and then press the
{
#
Enter
}
key.
The following message appears on the display.
R
Press the
{U}
or
{T}
key to display [ Active ], and then press the
{
# Enter
}
key.
The following message appears on the display.
❒
When setting the [ WEP Setting ] to [ Active ] , you will need to enter the WEP
key. If you have not entered the key, be sure to enter it.
❒
If you have entered the WEP key and change the setting, press the
{U}
or
{T}
key to display [ No ] , and then press the
{
# Enter
}
key.
S
Press the
{U}
or
{T}
key to display [ Yes (HEX) ] when inputting a hexadec-
imal WEP key or [ Yes (ASCII) ] when inputting an ASCII WEP key. Then
press the
{
# Enter
}
key.
The value in brackets at the upper right is the number of characters entered.
SSID: [32]
AAAAAAAAAAAAAAAA
WEP Setting:
*Not Active
Change WEP Key:
Yes (HEX)
WEP Key: [ 0]
k