Lanier LP222cn, Руководство оператора

Страница: 142 / 536

Preparing for Printing
23
B
Insert the CD-ROM into the CD-ROM drive.
The installer starts.
Auto Run may not work with certain operating system settings. If this hap-
pens, launch “Setup.exe” on the CD-ROM root directory.
C
Select an interface language, and then click [ OK ].
The default interface language is English.
❒
The printer driver with the selected language will be installed. The English
printer driver is installed when the following language is selected: Cestina,
Magyar, Polski, Portugues, Suomi.
D
Click [ PostScript 3 Printer Driver ].
Add Printer Wizard starts.
E
Click [ next > ].
F
Click [ Local printer ], and then click [ next > ].
G
Click [ Add Port... ].
H
Click [ SmartDeviceMonitor ], and then click [ Next > ].
I
Click [ TCP/IP ], and then click [ Search ].
A list of printers using TCP/IP appears.
J
Select the printer you want to use, and then click [ OK ].
Only printers that respond to a broadcast from the computer appear. To use
a printer not listed here, click
[ Specify Address ] , and then enter the IP address
or host name of the printer.
K
Check that the name of the printer whose driver you want to install is se-
lected, and then click [
Next > ].
L
Change the printer name if you want, and then click [ Next > ].
Select the [ Yes ] check box to configure the printer as default.
M
Click [ Next > ].
N
Specify whether or not to print a test page, and then click [ Next> ].
O
Click [ Finish ].
The printer driver installation starts.
❒
A User Code can be set after the printer driver installation. For information
about User Code, see the printer driver Help.