Lanier LP222cn, Руководство оператора

Страница: 103 / 536

Configuration
91
The [ Menu ] screen appears.
B
Press the
{U}
or
{T}
key to display [ Host Interface ] menu, and then press
the
{
# Enter
}
key.
The interface setting menu appears.
C
Press the
{U}
or
{T}
key to display [ Network Setup ], and then press the
{
#
Enter
}
key.
The network setup menu appears.
D
Press the
{U}
or
{T}
key to display [ Active Protocol ], and then press the
{
# Enter
}
key.
E
Press the
{U}
or
{T}
key to select Active Protocol, and then press the
{
# Enter
}
key.
The following example explains activating TCP/IP.
The “Active/Not Active” selection screen appears.
F
Press the
{U}
or
{T}
key to select [ Active ] or [ Not Active ], and then press
the
{
# Enter
}
key.
After the settings are made, about two seconds later, the screen returns to the
active protocol menu.
G
Set other protocols you need to set in the same way.
H
Press the
{
Escape
}
key, the screen returns to the network setup menu.
❒
The default is “Active”.
❒
Leave unused protocols “Not Active”.
❒
Enable TCP/IP to use the Pure IP environment of NetWare 5/5.1, NetWare
6/6.5.
I
If you use TCP/IP, assign the IP address to the printer. Press the
{U}
or
{T}
key to display [ IP Address ], and then press the
{
# Enter
}
key.
The current IP address appears on the display.
Menu:
Host Interface
Active Protocol:
TCP/IP
TCP/IP:
*Active