Lanier LP222cn Скачать руководство пользователя страница 396

Страница: 396 / 536

Appendix

277

• Printing in a peer-to-peer network, using TCP/IP, and IPP from Windows

95/98/Me/2000/XP, Windows Server 2003, and Windows NT 4.0.

• Constantly monitoring the status of devices on the network using TCP/IP and

IPX/SPX.

❖

File path

SmartDeviceMonitor for Client is stored in the following folder on the CD-
ROM.

NETWORKDEVMONCLIENTDISK1

❖

Available functions

SmartDeviceMonitor for Client has the following functions.

• Peer-to-peer print function

• Prints directly on the network printer without sending any data to a print

server.

• Prints on a substitute printer when there are too many jobs waiting on

the specified printer, or when an error disables printing (Recovery Print-
ing).

• Allocates multiple print jobs to multiple printers (Parallel Printing).

Operating system

Protocol stack

Windows 95/98/Me

TCP/IP provided with Windows 95/98/Me

IPX/SPX provided with Windows 95/98/Me

NetWare Client provided with Windows 95/98/Me

Novell Client provided with Windows 95/98/Me

Windows 2000

TCP/IP provided with Windows 2000

IPX/SPX provided with Windows 2000

NetWare Client provided with Windows 2000

Novell Client provided with Windows 2000 or NT

Windows XP

TCP/IP provided with Windows XP

IPX/SPX provided with Windows XP

NetWare Client provided with Windows XP

Novell Client provided with Windows XP

Windows Server 2003

TCP/IP provided with Windows Server 2003

IPX/SPX provided with Windows Server 2003

NetWare Client provided with Windows Server 2003

Novell Client provided with Windows Server 2003

Windows NT 4.0

TCP/IP provided with Windows NT

IPX/SPX provided with Windows NT

Client Service for NetWare provided with Windows
NT

Novell Client provided with Windows 2000 or Win-
dows NT

Содержание LP222cn

























































































































































































































































































































































































































































































































































Результаты поиска

Содержание LP222cn

Отзывы:

Похожие инструкции для LP222cn

Бренды по названию

Популярные бренды

Lanier LP222cn, Руководство оператора

Результаты поиска

Содержание LP222cn

Отзывы:

Похожие инструкции для LP222cn

Бренды по названию

Популярные бренды