Lanier LP222cn, Руководство оператора

Страница: 109 / 536

Configuration
97
I
Set [ Trans. Speed ] in the same way.
❒
The factory default is “Auto”. If you need to change the transmitting speed
depending on environment you are using, select the appropriate transmit-
ting speed.
J
If [ Infrastructure ] or [ 802.11 Ad hoc ] is selected for [ Comm. Mode ], set [ SSID ] to
use for transmission.
❒
Confirm the network administrator for SSID to use.
❒
SSID can also be set using a Web browser. For details, see the Web Image
Monitor Help, and “Configuring the Network Interface Board Using Web
Browser”, Software Guide.
K
Press the
{U}
or
{T}
key to display [ SSID ], and then press the
{
# Enter
}
key.
The following message appears on the display.
If an SSID has been set, you can check the set SSID. Press the
{
# Enter
}
key.
L
Press the
{U}
or
{T}
key to display [ Enter ID ], and then press the
{
# Enter
}
key.
The following message appears on the display.
The value in brackets at the upper right is the number of characters entered.
M
Press the
{U}
or
{T}
key to select characters, and then press the
{
# En-
ter
}
key.
You can now enter the next character.
N
Continue entering the key.
❒
The characters that can be used are ASCII 0x20-0x7e (32 bytes).
❒
To display the previous character, press the
{
Escape
}
key.
SSID:
View
SSID: [ 0]
k
SSID: [ 1]
A
k