Kontron CP6923, Справочное руководство, Страница: 78 / 480

Switching Commands CP6923
CP6923 CLI Reference Manual Page 2 - 34
2.6 Provisioning (IEEE 802.1p) Commands
This section describes the commands you use to configure provisioning, which allows you to prioritize ports.
2.6.1 vlan port priority all
This command configures the port priority assigned for untagged packets for all ports presently plugged into the
device. The range for the priority is 0-7. Any subsequent per port configuration will override this configuration setting.
2.6.2 vlan priority
This command configures the default 802.1p port priority assigned for untagged packets for a specific interface. The
range for the priority is 0–7.
2.7 Protected Ports Commands
This section describes commands you use to configure and view protected ports on a switch. Protected ports do not
forward traffic to each other, even if they are on the same VLAN. However, protected ports can forward traffic to all
unprotected ports in their group. Unprotected ports can forward traffic to both protected and unprotected ports. Ports
are unprotected by default.
If an interface is configured as a protected port, and you add that interface to a Port Channel or Link Aggregation
Group (LAG), the protected port status becomes operationally disabled on the interface, and the interface follows
the configuration of the LAG port. However, the protected port configuration for the interface remains unchanged.
Once the interface is no longer a member of a LAG, the current configuration for that interface automatically
becomes effective.
Voice VLAN
Priority
The do1p priority for the Voice VLAN on the port.
Voice VLAN
Untagged
The tagging option for the Voice VLAN traffic.
Voice VLAN CoS
Override
The Override option for the voice traffic arriving on the port.
Voice VLAN Status The operational status of Voice VLAN on the port.
Format
vlan port priority all <priority>
Mode Global Config
Default 0
Format
vlan priority <priority>
Mode Interface Config
Term Definition