Kontron CP6923, Справочное руководство, Страница: 135 / 480

CP6923 Switching Commands
Page 2 - 91 CP6923 CLI Reference Manual
Example: The following shows example CLI display output for the command show ip arp inspection statistics
vlan < vlan-list > .
VLAN DHCP ACL DHCP ACL Bad Src Bad Dest Invalid
Drops Drops Permits Permits MAC MAC IP
----- -------- --------- ----------- --------- ---------- ----------- ---------
10
11 1 65 25 1 1 0
20 1 0 8 2 0 1 1
2.17.11 clear ip arp inspection statistics
Use this command to reset the statistics for Dynamic ARP Inspection on all VLANs.
2.17.12 show ip arp inspection interfaces
Use this command to display the Dynamic ARP Inspection configuration on all the DAI-enabled interfaces. An
interface is said to be enabled for DAI if at least one VLAN, that the interface is a member of, is enabled for DAI.
Given a slot/port interface argument, the command displays the values for that interface whether the interface is
enabled for DAI or not.
Example: The following shows example CLI display output for the command.
(Switching) #show ip arp inspection interfaces
Interface Trust State Rate Limit Burst Interval
(pps) (seconds)
--------------- ----------- ---------- ---------------
0/1 Untrusted 15 1
0/2 Untrusted 10 10
2.17.13 show arp access-list
Use this command to display the configured ARP ACLs with the rules. Giving an ARP ACL name as the argument
will display on ly the rules in that ARP ACL.
Default
none
Format
clear ip arp inspection statistics
Mode Privileged EXEC
Format
show ip arp inspection interfaces [slot/port]
Mode • Privileged EXEC
• User EXEC
Term Definition
Interface The interface ID for each displayed row.
Trust State Whether the interface is trusted or untrusted for DAI.
Rate Limit The configured rate limit value in packets per second.
Burst Interval The configured burst interval value in seconds.
Format
show arp access-list [acl-name]