Kontron CP6923, Справочное руководство, Страница: 357 / 480

CP6923 Utility Commands
Page 6 - 43 CP6923 CLI Reference Manual
6.8.10.1 no bootfile
This command deletes the boot image name.
6.8.11 domain-name
This command specifies the domain name for a DHCP client. The <domain> specifies the domain name string of
the client.
6.8.11.1 no domain-name
This command removes the domain name.
6.8.12 netbios-name-server
This command configures NetBIOS Windows Internet Naming Service (WINS) name servers that are available to
DHCP clients.
One IP address is required, although one can specify up to eight addresses in one command line. Servers are listed
in order of preference (address1 is the most preferred server, address2 is the next most preferred server, and so on).
6.8.12.1 no netbios-name-server
This command removes the NetBIOS name server list.
6.8.13 netbios-node-type
The command configures the NetBIOS node type for Microsoft Dynamic Host Configuration Protocol (DHCP)
clients.type Specifies the NetBIOS node type. Valid types are:
• b-node—Broadcast
• p-node—Peer-to-peer
• m-node—Mixed
Format
no bootfile
Mode DHCP Pool Config
Default none
Format
domain-name <domain>
Mode DHCP Pool Config
Format
no domain-name
Mode DHCP Pool Config
Default none
Format
netbios-name-server <address> [<address2>...<address8>]
Mode DHCP Pool Config
Format
no netbios-name-server
Mode DHCP Pool Config