Kontron CP6923, Справочное руководство, Страница: 147 / 480

CP6923 Switching Commands
Page 2 - 103 CP6923 CLI Reference Manual
2.20.3.1 no set mld fast-leave
Use this command to disable MLD Snooping fast-leave admin mode on a selected interface.
2.20.4 set mld groupmembership-interval
Use this command to set the MLD Group Membership Interval time on a VLAN, one interface or all interfaces. The
Group Membership Interval time is the amount of time in seconds that a switch waits for a report from a particular
group on a particular interface before deleting the interface from the entry. This value must be greater than the
MLDv2 Maximum Response time value. The range is 2 to 3600 seconds.
2.20.4.1 no set groupmembership-interval
Use this command to set the MLDv2 Group Membership Interval time to the default value.
2.20.5 set mld maxresponse
Use this command to set the MLD Maximum Response time for the system, on a particular interface or VLAN. The
Maximum Response time is the amount of time in seconds that a switch will wait after sending a query on an
interface because it did not receive a report for a particular group in that interface. This value must be less than the
MLD Query Interval time value. The range is 1 to 65 seconds.
2.20.5.1 no set mld maxresponse
Use this command to set the max response time (on the interface or VLAN) to the default value.
Format
no set mld fast-leave <vlanid>
Mode • Interface Config
• VLAN Mode
Default 260 seconds
Format
set mld groupmembership-interval <vlanid> <2-3600>
Mode • Interface Config
• Global Config
• VLAN Mode
Format
no set mld groupmembership-interval
Mode • Interface Config
• Global Config
• VLAN Mode
Default 10 seconds
Format
set mld maxresponse <1-65>
Mode • Global Config
• Interface Config
• VLAN Mode
Format
no set mld maxresponse
Mode • Global Config
• Interface Config
• VLAN Mode