Kontron CP6923, Справочное руководство, Страница: 359 / 480

CP6923 Utility Commands
Page 6 - 45 CP6923 CLI Reference Manual
6.8.16 ip dhcp excluded-address
This command specifies the IP addresses that a DHCP server should not assign to DHCP clients. Low-address and
high-address are valid IP addresses; each made up of four decimal bytes ranging from 0 to 255. IP address
0.0.0.0 is invalid.
6.8.16.1 no ip dhcp excluded-address
This command removes the excluded IP addresses for a DHCP client. Low-address and high-address are valid IP
addresses; each made up of four decimal bytes ranging from 0 to 255. IP address 0.0.0.0 is invalid.
6.8.17 ip dhcp ping packets
Use this command to specify the number, in a range from 2-10, of packets a DHCP server sends to a pool address
as part of a ping operation. By default the number of packets sent to a pool address is 2, which is the smallest
allowed number when sending packets. Setting the number of packets to 0 disables this command.
6.8.17.1 no ip dhcp ping packets
This command prevents the server from pinging pool addresses and sets the number of packets to 0.
6.8.18 service dhcp
This command enables the DHCP server.
6.8.18.1 no service dhcp
This command disables the DHCP server.
Default none
Format ip dhcp excluded-address <lowaddress> [highaddress]
Mode Global Config
Format
no ip dhcp excluded-address <lowaddress> [highaddress]
Mode Global Config
Default 2
Format
ip dhcp ping packets <0,2-10>
Mode Global Config
Default 0
Format
no ip dhcp ping packets
Mode Global Config
Default disabled
Format
service dhcp
Mode Global Config
Format
no service dhcp
Mode Global Config