manualshive.com logo in svg

Kontron CP6923, Справочное руководство, Страница: 422 / 480

Поделиться
Скачать
Kontron CP6923 Скачать руководство пользователя страница 422

Management Commands

CP6923

CP6923 CLI Reference Manual

Page 7 - 36

7.10.1

tacacs-server host

Use the 

tacacs-server host

 command in Global Configuration mode to configure a server. This

command enters into the  configuration mode. The 

<ip-address|hostname>

 

parameter is the IP

address or hostname of the  server. To specify multiple hosts, multiple

 

tacacs-server host

commands can be used. 

7.10.1.1

no tacacs-server host

Use the 

no tacacs-server host

 command to delete the specified hostname or IP address. The 

<ip-

address|hostname>

 

parameter is the IP address of the  server. 

7.10.2

tacacs-server key

Use the 

tacacs-server key

 command to set the authentication and encryption key for all

communications between the switch and the  daemon. The 

<key-string>

 parameter has a range of 0

- 128 characters and specifies the authentication and encryption key for all TACACS communications between the
switch and the server. This key must match the key used on the daemon.

Text-based configuration supports TACACS server’s secrets in encrypted and non-encrypted format. When you
save the configuration, these secret keys are stored in encrypted format only. If you want to enter the key in
encrypted format, enter the key along with the encrypted keyword. In the show running config command’s display,
these secret keys are displayed in encrypted format. You cannot show these keys in plain text format.

7.10.2.1

no tacacs-server key

Use the 

no tacacs-server key

 command to disable the authentication and encryption key for all

communications between the switch and the  daemon. The 

<key-string>

 parameter has a range of 0

- 128 characters This key must match the key used on the  daemon.

7.10.3

tacacs-server timeout

Use the 

tacacs-server timeout

 command to set the timeout value for communication with the

servers. The 

<timeout>

 

parameter has a range of 1-30 and is the timeout value in seconds. 

Format

tacacs-server host

 

<ip-address|hostname>

Mode

Global Config

Format

no tacacs-server host

 

<ip-address|hostname>

Mode

Global Config

Format

tacacs-server key

 [

<key-string> | encrypted <key-string>]

Mode

Global Config

Format

no tacacs-server key

 

<key-string>

Mode

Global Config

Default

5

Format

tacacs-server timeout

 <timeout>

Mode

Global Config

Содержание CP6923

































































































































































































































































































































































































































































































Отзывы:

Нет отзывов