Kontron CP6923, Справочное руководство, Страница: 423 / 480

CP6923 Management Commands
Page 7 - 37 CP6923 CLI Reference Manual
7.10.3.1 no tacacs-server timeout
Use the
no tacacs-server timeout
command to restore the default timeout value for all TACACS servers.
7.10.4 key
Use the key command in TACACS Configuration mode to specify the authentication and encryption key for all
TACACS communications between the device and the TACACS server. This key must match the key used on the
TACACS daemon. The
<key-string>
parameter specifies the key name. For an empty string use “ ”. (Range: 0
- 128 characters).
Text-based configuration supports TACACS server’s secrets in encrypted and non-encrypted format. When you
save the configuration, these secret keys are stored in encrypted format only. If you want to enter the key in
encrypted format, enter the key along with the encrypted keyword. In the show running config command’s display,
these secret keys are displayed in encrypted format. You cannot show these keys in plain text format.
7.10.5 port
Use the
port
command in TACACS Configuration mode to specify a server port number. The server
<port-
number>
range is 0 - 65535.
7.10.6 priority
Use the
priority
command in TACACS Configuration mode to specify the order in which servers are used, where
0 (zero) is the highest priority. The
<priority>
parameter specifies the priority for servers. The highest priority is
0 (zero), and the range is 0 - 65535.
7.10.7 timeout
Use the
timeout
command in TACACS Configuration mode to specify the timeout value in seconds. If no timeout
value is specified, the global value is used. The
<timeout>
parameter has a range of 1-30 and is the timeout value
in seconds.
Format
no tacacs-server timeout
Mode Global Config
Format
key
[
<key-string> | encrypted <key-string>]
Mode TACACS Config
Default 49
Format
port <port-number>
Mode TACACS Config
Default 0
Format
priority <priority>
Mode TACACS Config
Format
timeout <timeout>
Mode TACACS Config