Kontron CP6923, Справочное руководство, Страница: 386 / 480

Utility Commands CP6923
CP6923 CLI Reference Manual Page 6 - 72
Example: The following shows example CLI display output for the command.
(switch) #show sflow receivers 1
Receiver Index................................. 1
Owner String...................................
Time out....................................... 0
IP Address:.................................... 0.0.0.0
Address Type................................... 1
Port........................................... 6343
Datagram Version............................... 5
Maximum Datagram Size.......................... 1400
6.13.7 show sflow samplers
Use this command to display the sFlow sampling instances created on the switch.
Field Description
Receiver Index The sFlow Receiver associated with the sampler/poller.
Owner String The identity string for receiver, the entity making use of this sFlowRcvrTable entry.
Time Out The time (in seconds) remaining before the receiver is released and stops sending samples
to sFlow receiver.
Max Datagram Size The maximum number of bytes that can be sent in a single sFlow datagram.
Port The destination Layer4 UDP port for sFlow datagrams.
IP Address The sFlow receiver IP address.
Address Type The sFlow receiver IP address type. For an IPv4 address, the value is 1 and for an IPv6
address, the value is 2.
Datagram Version The sFlow protocol version to be used while sending samples to sFlow receiver.
Format
show sflow samplers
Mode Privileged EXEC
Field Description
Sampler Data
Source
The sFlowDataSource (slot/port) for this sFlow sampler. This agent will support Physical ports
only.
Receiver Index The sFlowReceiver configured for this sFlow sampler.
Packet Sampling
Rate
The statistical sampling rate for packet sampling from this source.
Max Header Size The maximum number of bytes that should be copied from a sampled packet to form a flow
sample.