Kontron CP6923, Справочное руководство, Страница: 279 / 480

CP6923 Routing Commands
Page 4 - 67 CP6923 CLI Reference Manual
4.10.2 ip redirects
Use this command to enable the generation of ICMP Redirect messages by the router. By default, the generation
of ICMP Redirect messages is enabled.
4.10.2.1 no ip redirects
Use this command to prevent the generation of ICMP Redirect messages by the router.
4.10.3 ip icmp echo-reply
Use this command to enable the generation of ICMP Echo Reply messages by the router. By default, the generation
of ICMP Echo Reply messages is enabled.
4.10.3.1 no ip icmp echo-reply
Use this command to prevent the generation of ICMP Echo Reply messages by the router.
4.10.4 ip icmp error-interval
Use this command to limit the rate at which IPv4 ICMP error messages are sent. The rate limit is configured as a
token bucket, with two configurable parameters,
burst-size and burst-interval .
The burst-interval specifies how often the token bucket is initialized with burst-size tokens. burst-interval is from 0 to
2147483647 milliseconds (msec).
The burst-size is the number of ICMP error messages that can be sent during one burst-interval . The range is from
1 to 200 messages.
To disable ICMP rate limiting, set burst-interval to zero (0).
Default enable
Format
ip redirects
Mode • Global Config
• Interface Config
Format
no ip redirects
Mode • Global Config
• Interface Config
Default enable
Format
ip icmp echo-reply
Mode Global Config
Format
no ip icmp echo-reply
Mode Global Config