Kontron CP6923, Справочное руководство, Страница: 347 / 480

CP6923 Utility Commands
Page 6 - 33 CP6923 CLI Reference Manual
For TFTP, SFTP and SCP, the
<ipaddr|hostname>
parameter is the IP address or host name of the server,
<filepath>
is the path to the file, and
<filename>
is the name of the file you want to upload or download. For
SFTP and SCP, the <username> parameter is the username for logging into the remote server via SSH.
Note:
< ip6address >
is also a valid parameter for routing packages that support IPv6.
Caution! Remember to upload the existing fastpath.cfg file off the switch prior to loading a new release
image in order to make a backup.
Table 1: Copy Parameters
Source Destination Description
nvram:all-config <url> Copies all configuration information to the especified
URL. The transfer will create a “.tar.gz” file including all
configration files stored in “/mnt/fastpath” and “/mnt/os”
and important bootloader settings
nvram:backup-config nvram:startup-config
Copies the backup configuration to the startup
configuration.
nvram:clibanner <url> Copies the CLI banner to a server.
nvram:current-
settings
<url>
Copies the current-settings configuration file to a
specified URL
nvram:errorlog <url>
Copies the error log file to a server.
nvram:extra-profile <url>
Copies the extra-profile configuration file to a specified
URL
nvram:factory-
settings
nvram:current-
settings
Copies factory settings file to current settings file
nvram:factory-config nvram:current-config Copies factory configuration file to current
configuration file
nvram:fastpath.cfg <url>
Uploads the binary config file to a specified URL
nvram:log <url>
Copies the log file to a server.
nvram:script
<scriptname>
<url>
Copies a specified configuration script file to a server.
nvram:sga-mapping <url>
Copies the SGA/GA-mapping file to a specified URL.
The mapping can be configured by using command
6.1.9 “startupslot sga“ on page 6 - 4
nvram:startup-config nvram:backup-config
Copies the startup configuration to the backup
configuration.
nvram:startup-config <url>
Copies the startup configuration to a server.
nvram:startup.cfg <url>
Copies the startup configuration file to a specified
URL. The startupslot configuration canbe configured
using the command 6.1.6 “startupslot“ on page 6 - 3
nvram:traplog <url>
Copies the trap log file to a server.
system:running-config nvram:startup-config
[slot <1..99>]
Saves the running configuration to nvram. A specific
configuration slot for storing has been added
<url> nvram:all-config
Downloads all configuration information from the
especified URL. The file must be a “.tar.gz” file
including all configration files stored in “/mnt/fastpath”
and “/mnt/os” and important bootloader settings
<url> nvram:clibanner
Downloads the CLI banner to the system.
<url> nvram:current-
settings
Downloads the current-settings file from a specified
URL.