Kontron CP6923, Справочное руководство, Страница: 40 / 480

Using the Command-Line Interface CP6923
CP6923 CLI Reference Manual Page 1 - 6
Table 6 explains how to enter or exit each mode.
Policy Class
Config
Switch (Config-policy-class-map)#
Consists of class creation, deletion, and
matching commands. The class match
commands specify Layer 2, Layer 3, and
general match criteria.
Class Map Config
Switch (Config-class-map)#
Contains the QoS class map configuration
commands for IPv4.
Router OSPF
Config
Switch (Config-router)#
Contains the OSPF configuration commands.
Router RIP Config
Switch (Config-router)#
Contains the RIP configuration commands.
MAC Access-list
Config
Switch (Config-mac-access-list)#
Allows you to create a MAC Access-List and
to enter the mode containing MAC Access-
List configuration commands.
TACACS Config
Switch (Tacacs)#
Contains commands to configure properties
for the TACACS servers.
DHCP Pool
Config
Switch (Config dhcp-pool)#
Contains the DHCP server IP address pool
configuration commands.
ARP Access-List
Config Mode
Switch (Config-arp-access-list)#
Contains commands to add ARP ACL rules in
an ARP Access List.
Table 6: CLI Mode Access and Exit
Command Mode Access Method Exit or Access Previous Mode
User EXEC This is the first level of access. To exit, enter
logout
.
Privileged EXEC From the User EXEC mode, enter
enable
.
To exit to the User EXEC mode, enter
exit
or
press
Ctrl-Z.
Global Config From the Privileged EXEC mode, enter
configure.
To exit to the Privileged EXEC mode, enter
exit
,
or press
Ctrl-Z
.
VLAN Config From the Privileged EXEC mode, enter
vlan database.
To exit to the Privileged EXEC mode, enter
exit
,
or press Ctrl-Z .
Interface Config From the Global Config mode, enter
interface <slot/port>
or
interface loopback <id>
or
interface tunnel <id>
To exit to the Global Config mode, enter
exit
. To
return to the Privileged EXEC mode, enter
Ctrl-
Z
.
Line Config From the Global Config mode, enter
lineconfig
.
To exit to the Global Config mode, enter
exit
. To
return to the Privileged EXEC mode, enter
Ctrl-
Z
.
Policy-Map
Config
From the Global Config mode, enter
policy-map
.
To exit to the Global Config mode, enter exit . To
return to the Privileged EXEC mode, enter
Ctrl-
Z
.
Policy-Class-Map
Config
From the Policy Map mode enter
class
. To exit to the Policy Map mode, enter
exit
. To
return to the Privileged EXEC mode, enter
Ctrl-
Z
.
Class-Map
Config
From the Global Config mode, enter
class-map
, and specify the optional
keyword ipv4 to specify the Layer 3
protocol for this class. See 3.3.1 “class-
map” on page 3 - 9 for more information.
To exit to the Global Config mode, enter
exit
. To
return to the Privileged EXEC mode, enter
Ctrl-
Z .
Table 5: CLI Command Modes (Continued)
Command Mode Prompt Mode Description