Kontron CP6923, Справочное руководство, Страница: 262 / 480

Routing Commands CP6923
CP6923 CLI Reference Manual Page 4 - 50
Metric........................................Not configured
Metric Type...................................External Type 2
Number of Active Areas......................... 3 (3 normal, 0 stub, 0 nssa)
ABR Status....................................Disable
ASBR Status...................................Disable
Stub Router...................................FALSE
External LSDB Overflow........................FALSE
External LSA Count............................0
External LSA Checksum.........................0
AS_OPAQUE LSA Count...........................0
AS_OPAQUE LSA Checksum........................0
LSAs Originated...............................0
LSAs Received.................................0
LSA Count.....................................0
Maximum Number of LSAs........................18200
LSA High Water Mark...........................0
Retransmit List Entries........................ 9078
Maximum Number of Retransmit Entries........... 72800
Retransmit Entries High Water Mark............. 72849
show ip ospf abr
This command displays the internal OSPF routing table entries to Area Border Routers (ABR). This command takes
no options.
4.8.54 show ip ospf area
This command displays information about the area. The
< areaid >
identifies the OSPF area that is being displayed.
Format
show ip ospf abr
Mode • Privileged EXEC
• User EXEC
Term Definition
Type The type of the route to the destination. It can be either:
• intra — Intra-area route
• inter — Inter-area route
Router ID Router ID of the destination.
Cost Cost of using this route.
Area ID The area ID of the area from which this route is learned.
Next Hop Next hop toward the destination.
Next Hop Intf The outgoing router interface to use when forwarding traffic to the next hop.
Format
show ip ospf area <areaid>
Modes • Privileged EXEC
• User EXEC
Term Definition
AreaID The area id of the requested OSPF area.