Kontron CP6923, Справочное руководство, Страница: 217 / 480

CP6923 Routing Commands
Page 4 - 5 CP6923 CLI Reference Manual
The value for
<seconds>
is a valid positive integer, which represents the IP ARP entry ageout time in seconds. The
range for
<seconds>
is between 15-21600 seconds.
4.1.8.1 no arp timeout
This command configures the default ARP entry ageout time.
4.1.9 clear arp-cache
This command causes all ARP entries of type dynamic to be removed from the ARP cache. If the gateway keyword
is specified, the dynamic entries of type gateway are purged as well.
4.1.10 clear arp-switch
Use this command to clear the contents of the switch’s Address Resolution Protocol (ARP) table that contains
entries learned through the Management port. To observe whether this command is successful,
ping
from the
remote system to the DUT. Issue the
show arp switch
command to see the ARP entries. Then issue the
clear
arp-switch
command and check the
show arp switch
entries. There will be no more arp entries.
4.1.11 show arp
This command displays the Address Resolution Protocol (ARP) cache. The displayed results are not the total ARP
entries. To view the total ARP entries, the operator should view the
show arp
results in conjunction with the
show
arp switch
results.
Default 1200
Format
arp timeout <15-21600>
Mode Global Config
Format
no arp timeout
Mode Global Config
Format
clear arp-cache [gateway]
Mode Privileged EXEC
Format
clear arp-switch
Mode Privileged EXEC
Format
show arp
Mode Privileged EXEC
Term Definition
Age Time (seconds) The time it takes for an ARP entry to age out. This is configurable. Age time is measured in
seconds.
Response Time
(seconds)
The time it takes for an ARP request timeout. This value is configurable. Response time is
measured in seconds.
Retries The maximum number of times an ARP request is retried. This value is configurable.
Cache Size The maximum number of entries in the ARP table. This value is configurable.