Kontron CP6923, Справочное руководство, Страница: 122 / 480

Switching Commands CP6923
CP6923 CLI Reference Manual Page 2 - 78
2.15.5 macfilter addsrc all
This command adds all interfaces to the source filter set for the MAC filter with the MAC address of
<macaddr>
and
<vlanid>
. You must specify the
<macaddr>
parameter as a 6-byte hexadecimal number in the format of
b1:b2:b3:b4:b5:b6. The
<vlanid>
parameter must identify a valid VLAN.
2.15.5.1 no macfilter addsrc all
This command removes all interfaces to the source filter set for the MAC filter with the MAC address of
<macaddr>
and VLAN of
<vlanid>
. You must specify the
<macaddr>
parameter as a 6-byte hexadecimal number in the
format of b1:b2:b3:b4:b5:b6.
The
<vlanid>
parameter must identify a valid VLAN.
2.15.6 show mac-address-table static
This command displays the Static MAC Filtering information for all Static MAC Filters. If you select
<all>
, all the
Static MAC Filters in the system are displayed. If you supply a value for
<macaddr>,
you must also enter a value
for
<vlanid>
, and the system displays Static MAC Filter information only for that MAC address and VLAN.
2.15.7 show mac-address-table staticfiltering
This command displays the Static Filtering entries in the Multicast Forwarding Database (MFDB) table.
Mode Interface Config
Format
macfilter addsrc all <macaddr> <vlanid>
Mode Global Config
Format
no macfilter addsrc all <macaddr> <vlanid>
Mode Global Config
Format
show mac-address-table static {<macaddr> <vlanid> | all}
Mode Privileged EXEC
Term Definition
MAC Address The MAC Address of the static MAC filter entry.
VLAN ID The VLAN ID of the static MAC filter entry.
Source Port(s) The source port filter set's slot and port(s).
Note: Only multicast address filters will have destination port lists.
Format
show mac-address-table staticfiltering
Mode Privileged EXEC